Wolf L Series SO30F Especificaciones descargar pdf (Pagina 12)

12

WOLF L SERIES BUILT-IN OVENS

IMPORTANT

NOTE

You must follow

all National

Electrical Code

regulations. In

addition, be aware

of local codes and

ordinances when

installing your

service.

Verify that power is disconnected from

electrical box before proceeding.

M

aximum connected load:

5

.1 kW

for 30" (762) and 36" (914) single ovens;

8.9 kW for the double oven.

Required power supply:

240V/208V/

30A/60Hz for 30" (762) and 36" (914) single

ovens; 240V/208V/50A/60Hz for the double

oven.

Minimum supply wire size:

L1, L2 and

ground – 10 AWG; neutral – 12 AWG

Total electric rating:

5.1 kW at 240 V,

3.8 kW at 208 V for 30" (762) and 36" (914)

single ovens with a minimum 30 amp

service; 8.9 kW at 240 V, 6.7 kW at 208 V for

the double oven with a minimum 50 amp

service.

Total amps:

21 amps for 30" (762) and 36"

(914) single ovens; 37 amps for the double

oven.

The built-in oven is provided with a conduit

consisting of two insulated hot lead conduc-

tors (copper), one insulated neutral conductor

(copper), and one uninsulated ground conduc-

tor (copper).

For UL installations:

attach the conductors

to the residence wiring in accordance with

National Electrical Codes and all state,

municipal and local codes.

For CSA installations:

attach the conductors

to the electrical box provided. Then connect

the residence wiring to the electrical box in

accordance with all national, provincial and

local codes.

With the oven positioned directly in front of

the cabinet opening, feed the appliance cable

through the opening in the cabinet platform

(where applicable). Then, depending upon

local codes, utilize one of the following

techniques to connect the appliance to the

electrical power supply.

ELECTRICAL REQUIREMENTS

The complete appliance must be properly

grounded at all times when electrical

power is applied.

Grounding through the neutral conductor

is prohibited for new branch-circuit

installations (1996 NEC); mobile homes;

and recreational vehicles, or in an area

w

here local codes prohibit grounding

through the neutral conductor.

If aluminum house supply wiring is

utilized, splice the appliance copper wir

e

to the aluminum house wiring using

special connectors design and agency

certified for joining copper and

aluminum. Follow the connector manu-

facturer's recommended procedure

carefully. NOTE: Improper connection can

result in a fire hazard.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios