Wolf 914 Guía de instalación descargar pdf (Pagina 3)

Wolf Gas Rangetops 3

wolfappliance.com/specs

Gas Rangetop Installation

IMPORTANT NOTE: T

his installation must be completed

by a qualified installer, service agency or gas supplier.

Read this entire installation guide prior to installation and

save for the local inspector’s reference. The homeowner

should keep this installation guide for future reference.

This appliance must be installed in accordance with

National Electrical Codes, as well as all state, municipal

and local codes. The correct voltage, frequency and

amperage must be supplied to the appliance from a dedi-

cated, grounded circuit which is protected by a properly

sized circuit breaker or time delay fuse. The proper

voltage, frequency, and amperage ratings are listed on the

product rating plate.

Wolf gas rangetops are manufactured for use with natural

gas or LP gas. Check the product rating plate for the type

of gas for your specific model. If this appliance does not

correspond to your type of gas, contact your authorized

Wolf dealer.

Record the model and serial numbers before installing the

gas rangetop. Both numbers are listed on the product

rating plate, located under the drip pan that supports the

burner grates, inside the left side panel of the rangetop.

Refer to the illustration below. The rating plate for French

top models (except model RT484F) is located inside the

right side panel.

olf Gas Rangetop

Model Number

Serial Number

Location of rating plate.

RATING PLATE (INSIDE PANEL)

1 2 3 4 5 6 7 8 ... 15 16

Sin comentarios

Wolf 914 Guía de instalación Pagina 3