Wolf DF364C Guía de instalación descargar pdf (Pagina 7)

Dual Fuel Range Specifications 7

wolfappliance.com/specs

WIRING DIAGRAM

The wiring diagram covering the control circuit is located

behind the control panel on top of the cavity insulation

retainer and under the control board.

Electrical Requirements

ocate the electrical supply flush with back wall and within

the shaded area shown in the illustration for your specific

model on the following pages.

30" AND 36" DUAL FUEL RANGES

• Power supply: 240 /208 V AC, 60 Hz with 30 amp

service.

• Maximum connected load: 5.2 kW.

• Total amps: 21 amps.

• Supply wire minimum size: L1, L2 and ground—

12 AWG, neutral—16 AWG.

48" AND 60" DUAL FUEL RANGES

• Power supply: 240 /208 V AC, 60 Hz with 50 amp

service.

• Maximum connected load: 10.2 kW.

• Total amps: 42.5 amps.

• Supply wire minimum size: L1 and L2—8 AWG,

ground—10 AWG, neutral—12 AWG.

IMPORTANT NOTE: You must follow all National Electrical

Code regulations. In addition, be aware of local codes and

ordinances when installing your service.

IMPORTANT NOTE: Performance may be compromised if

the electrical supply is less than 240 volts.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sin comentarios

Wolf DF364C Guía de instalación Pagina 7