Wolf DF364C Guía de instalación descargar pdf (Pagina 17)

Gas Supply Connection

IMPORTANT NOTE: All connections to the gas piping must

be wrench-tightened. Do not make connections too tight,

this may crack the regulator and cause a gas leak. Do not

allow the pipes to turn when tightening fittings.

Assemble the flexible metal connector from the gas supply

pipe to the gas pressure regulator. Determine the fittings

required depending on the size of your gas supply line,

flexible metal connector and shut-off valve. Refer to the

illustration below. If a flexible metal connector is used, be

sure the tubing is not kinked. Open the shut-off valve in

the gas supply line. Wait a few minutes for the gas to

move through the line.

GAS LEAK TESTING

Brush a liquid detergent solution onto all gas connections

to test for leaks. Bubbles around connections will indicate

a gas leak. If a leak appears, close the gas shut-off valve

and adjust connections. Check for leaks again. Clean off

the detergent solution.

Dual Fuel Range Installation 17

wolfappliance.com/specs

Never test for a gas leak with a match or other flame.

FLEXIBLE

METAL CONNECTOR

GAS PRESSURE

REGULATOR

SHUT-OFF

VALVE

ELBOW

ADAPTERADAPTER

NIPPLE

Gas supply line connection.

Before connecting the gas supply, make sure all valves

are in a closed position.

Range Removal

If removal of the dual fuel range is necessary for cleaning

or service, shut off the gas supply. Disconnect the electri-

cal and gas supply connections to the range. Remove the

range. Reinstall in the reverse order and be sure to check

gas connections for leaks.

Refer to the Wolf dual fuel ranges use & care guide for

cleaning recommendations.

Disconnect the electrical and gas supply connections

before removing the range.

1 2 ... 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Wolf DF364C Guía de instalación Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Barbacoas Y Parrillas Wolf DF364C