8
S
UB-ZERO U N D E R C O U N T E R US E & CARE
E
LECTRONIC CO N T R O L S
The electronic controls of your Sub-Zero
undercounter unit monitors and accurately
displays temperatures within one degree of
your preset temperature. It also monitors oper-
ation of the unit and lets you know if there’s a
problem.
A microprocessor accurately samples the
temperature every second in each zone to be
sure the temperatures stay within one degree
of your preset temperatures. It also monitors
the unit’s operation and will let you know if
service may be necessary.
TEMPERATURE C O N T R O L
To adjust the temperature in either section,
press the
WARMER
or
COLDER
key pads on
the control panel.
The temperature ranges are 34˚F (1˚C) to 45˚F
(7˚C) in the refrigerator section, and -5˚F (-21˚C)
to +5˚F (-15˚C) in the freezer section. It is
normal for temperatures to fluctuate slightly,
depending on external influences such as an
open door, the degree of humidity and room
temperature.
LCD D I S P L A Y
Electronic control functions, such as digital
temperatures and service indicators, are
shown in the LCD display, located on the
control panel. If you are using your unit
frequently, the numbers may fluctuate.
The temperature readout in the LCD display
will be visible through the glass door of model
UC-24BG.
UNIT O N / OF F
The
UNIT ON/OFF
key pad on the control
panel will shut off all electrical power to the
undercounter unit for cleaning or service.
SABBATH M O D E ( S T A R - K )
All undercounter units feature the Sabbath
mode. This is for certain religious observances
where the lights need to be turned off.
Sabbath mode will not disable the ice maker.
To initiate Sabbath mode, while the unit is on,
press the
UNIT ON/OFF
key pad so that OFF
is visible in the LCD display. The unit will be
off.
Then press and hold the
UNIT ON/OFF
key
pad for 10 seconds. This will turn the unit back
on and will disable the lights. To return the
unit to normal lighting, press and release the
UNIT ON/OFF
key pad.
If you have questions about Star-K compliance,
visit www.star-k.org.
VISUAL S E R V I C E D I S P L A Y
The microprocessor monitors temperatures
inside the unit. If there is a temperature
problem, you'll be alerted by a flashing
SERVICE indicator. The same SERVICE
indicator will also flash if the condenser needs
cleaning. Before calling for service, please
check and see if your condenser area needs
cleaning. Refer to condenser cleaning on
page 13.
(20 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales