Wolf Sub-Zero UC-24R Guía de uso y cuidado descargar pdf (Pagina 13)

Undercounter Use & Care 13

subzero.com

Cleaning

CONDENSER CLEANING

Clean the condenser area every three to six months. The

cleaning schedule will depend on the amount of dust and

lint that accumulates in this area.

The condenser is located behind the kickplate. Remove

the kickplate to expose the condenser area. Refer to the

illustration below. Use a soft bristle brush and vacuum

hose to remove dust and lint from the condenser area. To

avoid bending the condenser fins, be sure to vacuum in

the direction of the fins (up and down).

Interior Lighting

odel UC-24BG has rope-style lighting mounted to the

top interior of the cabinet that cascades down the sides of

the unit. This lighting is visible through the glass door.

All undercounter models have a recessed light bulb in the

ceiling of the unit. To change the bulb, remove the 25-watt

bulb by unscrewing it from the socket. Install a new

replacement bulb. Refer to the illustration below.

CONDENSER

Condenser location.

LIGHT BULB

Light bulb location.

Shut off power to the unit before replacing the light

bulb. Wear protective gloves when handling bulbs.

Failure to clean the condenser could result in tempera-

ture loss or mechanical failure or damage.

Before cleaning the condenser, shut off power to the

unit at the control panel. When you clean the

condenser, wear gloves to avoid injury from the sharp

condenser fins.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Wolf Sub-Zero UC-24R Guía de uso y cuidado Pagina 13