Wolf SDC-15 Manual de usuario descargar pdf (Pagina 15)

SDC-12/SDC-15

Pixel Alignment and Fine Adjustment Con t i nued

After making overall large scale window adjustments, proceed to fine-tuning. Press the [COLOR TEMP] button on the remote to

change from [ADJUST (PIXEL)] to [ADJUST (FINE)] operational windows. Or from the main menu, set the [ADJUST AREA] to [ALL]

and select [ADJUST COLOR] and [ADJUST PATTERN], then move the cursor to [ADJUST (FINE)] and press the [OK] button, which

will display the pattern and fine tuning operational window. Adjust the horizontal/vertical pixel structure as required. Maximum

deviation here is -31~31.

Next, set the [ADJUST AREA] to [ZONE] to make independent zone fine adjustments. There will be 11x11 smaller sections that can

be independently adjusted. For quick access to this menu press the [PIC ADJUST] button on the remote.

Use the [UP], [DOWN], [LEFT] and [RIGHT] keys to move the cursor to the position you want to adjust. Press the [OK] button to

enter the operation mode. Then use the [UP], [DOWN], [LEFT] and [RIGHT] keys to move and adjust the pixels within that zone, in

the horizontal and vertical directions. Press the [BACK] key to return to the previous screen or exit the alignment window.

REMOTE CONTROL DUAL USE BUTTONS

Use the [GAMMA] button to select [ADJUST COLOR], i.e. red or blue pixels

Use the [COLOR TEMP] button to change from the [ADJUST PIXEL] to the [ADJUST FINE] operational windows.

Use the [COLOR P.FILE] button to select [ADJUST PATTERN COLOR], i.e. white, green +.

Use the [PIC ADJUST] button to change from [ADJUST WHOLE AREA] to [ADJUST ZONE]

Use the [BACK] button to stop pixel alignment and exit this mode.

Notes on pixel alignment:

(*) It is impossible to match all image pixels on the screen. Due to properties inherent to D-ILA technology, there will always be

some gaps and overlapping structure. Color errors may also result from screen type used and on-axis/off-axis viewing positions.

(*) In case the image is reversed, or upside-down, the horizontal and vertical directions are reversed.

(*) Please perform adjustments on a clear, still image.

(*) When fine tuning, the effects of adjustments may be limited and perhaps difficult to see on certain image types.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Wolf SDC-15 Manual de usuario Pagina 15