Wolf DCX-1000FD El manual del propietario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
Wolf Cinema Owner's Manual
4-3
Slots and vents in the projector provide ventilation. Never block or cover these openings. This
ensures reliable operation of the projector and prevents overheating.
Do not place the projector over a radiator or heat register. The projector should not be placed •
in an enclosure unless proper ventilation is provided.
Do not insert objects into the ventilation openings of the projector. They may touch dangerous •
voltagesorshort-outcomponentsresultinginareorshockhazard.Donotspillliquidsof
any kind into the projector. Should an accidental spill occur, immediately unplug the projector
andhaveitservicedbyaqualiedservicetechnician.
If any of the following conditions exist, immediately unplug the projector from the power outlet
andaskaqualiedservicetechniciantolookatit.
The power cord has been damaged.•
Theinternalcoolingfansdonotturnonwithintwominuteswhentheprojectorisrstpowered•
up.
Liquid has been spilled into the projector.•
The projector has been exposed to excessive moisture.•
Theprojectorisnotoperatingnormallyoritsperformancehassignicantlydeterioratedina•
short period of time.
The projector has been dropped or the shipping case (if applicable) has been badly •
damaged.
WARNING
Do not attempt to service the projector yourself. All servicing must be performed by
Wolf Cinema accredited service technicians.
Use replacement parts that are manufacturer-approved only. Use of any other part other
than the ones specied by the manufacturer can result in re, electric shock or other
damage.
Ventilation >
Servicing >
Section4►Maintenance
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 151 152

Comentarios a estos manuales

Sin comentarios