Wolf SDC-15 Especificaciones descargar pdf (Pagina 63)

When the lamp run time

approaches 3,000 hours,

a message is displayed

on the screen and the lamp

replacement is encouraged.

• NEVER insert your hands into

the ANY opening while AC power

is connected! This could cause

product failure plus severe

personal injury, electric shock

and even death.

• Do not replace the lamp

immediately after the projector

has been used; allow a cooling

period of 1 hour or more before

lamp replacement. The lamp

assembly may still be hot and

can cause burns.

• Do not shake or otherwise

roughly handle the lamp unit.

This may cause failure.

• Do not use any flammable cloth

or duster to clean the internal

parts of the projector. This may

cause a fire.

MEMO

Usable Lamp Life

• When the “Lamp Power” is set at

“Normal", the lifetime of the lamp

will be approximately 3000 hours.

This is an average lifetime and

cannot be guaranteed.

• The lamp may not reach 3000

hours depending on your viewing

frequency or operating conditions.

• When the lamp has reached the

end of its usable life, deterioration

progresses rapidly.

• If the picture becomes dark,

the tint becomes strange, or the

image flickers, promptly replace

the lamp.

SDC-15 1080p D-ILA 3D Front Projector User’s Manual

Lamp Replacement Procedure

The lamp is a replaceable item. If the image becomes dark over time, or the lamp fails then

replace the lamp assembly.

1 Remove the Power Plug from the Outlet

2 Remove the Lamp Cover

• Remove the screws with a screwdriver.

3 Loosen the Screws on the Lamp Unit

• Loosen the screws with a screwdriver.

4 Pull Out the Lamp Unit

• Grasp the handle and pull out the lamp unit.

Replacing the Lamp

Purchasing the Lamp Unit

Please consult your authorized Wolf Cinema dealer.

Lamp Unit

Part No.: WC-LPU220

Handle

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 77 78

Comentarios a estos manuales

Sin comentarios

Wolf SDC-15 Especificaciones Pagina 63

Comentarios a estos manuales