Wolf PW302418 Guía de instalación descargar pdf (Pagina 15)

Pro Wall Hood Installation 15

wolfappliance.com/specs

24" and 27" Deep Wall Hoods

HOOD INSTALLATION

1) Attach the wood mounting support provided with the

hood. Refer to the illustration below. The mounting

support should be centered within the desired location

of the hood. Use 3"

(76) screws provided to attach the

mounting support to the wall.

2) Install mounting brackets to mounting support. Refer

to the chart and illustration below. Use #10 X 1

/2" (38)

screws and washers provided to secure the brackets.

Brackets should be mounted

/2" (13) above the

mounting support.

Mounting Support Location

WIDTH OF HOOD A

30" (762) 11

/4" (298)

36" (914) 12

/4" (311)

42" (1067)* 15

/4" (387)

48" (1219)* 18

/4" (464)

54" (1372)* 21

/4" (540)

60" (1524)* 24

/4" (616)

66" (1676)* 27

/4" (692)

CENTER

OF HOOD

" (13)

MOUNTING

BRACKET

(384)

TO BOTTOM

OF HOOD

Mounting support.

) Align cut-outs on the back of the hood with the

mounting brackets. Refer to the illustration below.

4) Position the hood and install #10 x 1

/2" (38) screws

and washers provided through the cut-outs. If addi-

tional support is required, drill supplementary mounting

holes in the back panel and use these holes to attach

the hood assembly to wall framing. Verify screws

engage the mounting support.

5) Connect damper to duct using sheet metal screws and

aluminum tape or high temperature duct tape. Verify

screws do not affect operation of the damper.

MOUNTING

CUT-OUTS

Location of cut-outs. Hood installation.

MOUNTING SUPPORT

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Wolf PW302418 Guía de instalación Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Campanas De Cocina Wolf PW302418