Wolf CTEWH45I Guía para resolver problemas descargar pdf (Pagina 6)

ELECTRICAL REQUIREMENTS

You must follow all National Electrical Code

regulations. In addition, be aware of local

codes and ordinances when installing your

service.

Wolf cooktop low-profile hoods require a

separate, grounded 110/120 V AC, 60 Hz power

supply. The service should have its own 15

amp circuit breaker.

For wall hoods, locate the electrical supply

through the wall and inside the area of the

flue, above the mounting bracket and right of

center. For the island hood, locate the electrical

supply through the ceiling and inside the area

of the flue.

6

WOLF COOKTOP LOW-PROFILE HOODS

INSTALLATION OPTIONS

Wolf cooktop low-profile hoods may be used

in a ducted or recirculating installation. For

greatest efficiency, the ducted installation is

recommended.

IMPORTANT NOTE:

Models with a remote

blower may not be used in a recirculating

installation.

DUCTED INSTALLATION

In a ducted installation, the hood aspirates the

kitchen air saturated with fumes and odors,

passes it through the grease filter(s) and

expels it to the outside through ductwork.

For this installation, a hood with an internal,

in-line or remote blower can be used. In-line

blowers are located in ductwork between the

hood and the outside. For wall hoods, the

remote blower can be mounted on the roof or

an exterior wall. Wolf in-line and remote

blower assemblies are available through your

Wolf dealer.

IMPORTANT NOTE:

Blower options vary with

the cooking surface. Use only a Wolf blower

with the cooktop low-profile hood.

RECIRCULATING INSTALLATION

In a recirculating installation, the hood aspi-

rates the kitchen air saturated with fumes and

odors, purifies it through the grease filter(s)

and charcoal filter and returns clean air into

the room. For constant efficiency, the charcoal

filter must be replaced periodically. For this

installation, a recirculation kit available

through your Wolf dealer will be required.

IMPORTANT

NOTE

You must follow

all National

Electrical Code

regulations. In

addition, be aware

of local codes and

ordinances when

installing your

service.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comentarios a estos manuales

Sin comentarios