INSTALLATION SPECIFICATIONS
Wolf downdraft Model DD30 will fit most 30"
(762) wide cabinets, Model DD36 will fit most
3
6" (914) wide cabinets and Model DD45 will fit
most 45
1
/2" (1156) wide cabinets. It is recom-
mended that oversized cabinets be used for
e
asier installation. Cabinet backs may need to
be removed.
Wolf downdraft ventilation systems can be
mounted in an island, peninsula or standard
wall location.
The illustration below provides installation
dimensions for all Wolf downdraft models.
Pay careful attention to the areas of potential
interference as noted in the illustration.
IMPORTANT NOTE:
To install a downdraft
system and a Wolf cooktop, you must allow for
a
minimum 25
1
/8"
(638) flat counter space from
front to back. A countertop with a raised lip or
backsplash may not allow enough space for
p
roper installation. 2
3
/8"
(60) of flat countertop
is required behind the cooktop and 1
3
/4" (44) is
necessary between the back edge of the
cooktop and inside of cabinet back.
If downdraft Model DD30 is installed in
combination with with two cooktops or inte-
grated modules, an integrated module support
(ISUPPORT) for downdraft ventilation is
required. ISUPPORT is not required for Model
DD45. If optional filler strips are used with the
cooktops or modules, be aware that they are
different for the Model DD30 and DD45. Be
sure to use the correct filler strip.
6
WOLF DOWNDRAFT VENTILATION SYSTEMS
2
1
/8
" (54)
19
1
/4
" (489)
COOKTOP CUT-OUT
DEPTH
2
36"
(914)
2
3
/8
" (60)
25
1
/8
"min (638)
OF FLAT COUNTERTOP
*
.344"
29
5
/16
"
(745)
COUNTERTOP
TO BOTTOM OF
AIR BOX
18"
(457)
3
5
/8
"
(92)
3
1
/4
"
(83)
5"
(127)
7
11
/16
"
(197)
5
/8
"
(16)
2
1
/2
"min
(64)
WITH NO
RAISED LIP
*
*
AREAS OF POTENTIAL INTERFERENCE
24"min (610)
CABINET DEPTH
1
3
/4
"min (44)
BACK EDGE
OF COOKTOP
TO INSIDE OF
CABINET BACK
*
7
1
/8
"
(181)
2
Downdraft installation dimensions
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales